GetTested
    Back to instructions

    Video instruction

    Text instruction

    Step 1 - image 1
    Step 1 - image 2
    Step 1 - image 3
    1

    Step 1

    Option 1: Using a Cup

    Collect urine in a clean, dry cup.
    Remove the cap of the device. Place the head of the sponge (≥2/3) into urine sample in a clean cup for at least 15 seconds.

    Note: Do not dip more than (2/3) of the head of the sponge into urine sample. Do not get urine on the result window.

    Option 2: Urinate on stick

    Remove the cap of the device.

    Hold the test by the thumb grip with the absorbent tip pointing downward directly into the urine stream for at least 15 seconds until it is thoroughly wet.

    Note: Do not urinate on the result window.

    Step 2 - image 1
    2

    Step 2

    Put the cap back over the absorbent tip, then place the test on a flat surface with the result window facing upward. Start a timer for three minutes.
    Step 3 - image 1
    3

    Step 3

    Read the result after 3 minutes . If no result appears, wait one more minute. Do not read the result after 10 minutes.
    Step 4 - image 1
    4

    Step 4

    Interpret results