Before you start, you need to register your test-ID. Your test kit contains a sticker with your unique test-ID. If you need help creating an account, you can check our guide.

Open the transport tubes and place one test ID on each tube.

Carefully open the provided "Stool Collecting" paper by pulling apart the edges by the arrows

Place the paper on the toilet seat and fold the seat ring over it so that it stays in place. Place the paper a little further back on the toilet seat.

Place the yellow stool collection tube up-right, to prevent the liquid from escaping. Unscrew the yellow cap counterclockwise and remove the sample lance.

Insert the sample lance at four different points into the stool sample, until the sample lance is filled.

Remove excess stool from the top of the sample lance.

Return the sample lance back into the yellow stool collection tube and turn the yellow cap until resistance engages and it can not be opened.

Then swirl the yellow stool collection tube back and forth several times.

Unscrew the brown cap counterclockwise, grab the lid with the connected spoon.

Fill the tube so that it reaches between the minimum and maximum line (preferably more towards maximum than minimum).

Some stool tests require that you to fill several tubes. You must fill all the tubes that you have received. Close the lid.

Place the yellow and brown stool collection tubes in the transport containers.

Pack the stool collection tubes in the enclosed return envelope and seal it.

Once your results are ready, you can download them on your account.

Usually available in 10-15 business days.