GetTested
    Back to instructions

    Video instruction

    Video 1 of 2

    Text instruction

    Register Test-ID - image 1
    1

    Register Test-ID

    Before you start, you need to register your test-ID. Your test kit contains a sticker with your unique test-ID. If you need help creating an account, you can check our guide.

    Register test
    Wash Hands - image 1
    2

    Wash Hands

    Wash your hands in warm water and massage your hand to increse blood flow. Dry your hands.

     

    Shake your hands to get the blood flowing.

    Note: Doing a blood test without stimulating blood circulation might prove difficult, so please do not skip this step!

    Disinfect Finger - image 1
    3

    Disinfect Finger

    Use the alcohol swab to disinfect the finger tip that you will prick.

    Let the alcohol dry completely before proceeding.

    Remove Protective Cover From Lancet - image 1
    4

    Remove Protective Cover From Lancet

    Rotate the protective cover on the blood lancet (yellow, blue or purple/pink lancet) to remove it. Use the extra lancet if you need to do another finger stick.
    Place Hand On Flat Surface - image 1
    5

    Place Hand On Flat Surface

    Place your hand on a flat surface. Put the lancet diagonally toward the test finger and press down the yellow button. Make sure the lancet is pressed against the finger the whole time.

    Note: The lancet can only be used once. If you have pressed the button without placing the lancet against your finger, you will not be able to use it again.

    Encourage Blood Flow - image 1
    6

    Encourage Blood Flow

    Gently massage your finger from the base toward the tip to encourage blood flow. Do not squeeze too hard as this may cause the blood to clot.
    Fillind The Tube - 600 line - image 1
    Fillind The Tube - 600 line - image 2
    7

    Fillind The Tube - 600 line

    Let the blood drip naturally into the test tube—standing up will improve blood flow.

    It is very important that you fill the tube to the upper 600 line, otherwise the lab will not be able to complete the test and you will need to send in a new one.

    Note: The tube already contains some liquid so keep it upright after opening.

    Place Your Test-ID Onto The Test Tube - image 1
    8

    Place Your Test-ID Onto The Test Tube

    Place the sticker with your unique test-ID onto the tube. Store in the fridge until you send it.
    Sending Sample - image 1
    9

    Sending Sample

    Put the sample in the provided envelope and send it.

    Note: Send your sample at the beginning of the week (preferably Monday or Tuesday) to avoid delays. Keep the sample refrigerated until sending.

    How To Send Your Sample
    Wait 10-15 Business Days For Results - image 1
    10

    Wait 10-15 Business Days For Results

    Results are usually available 10–15 business days after we receive your sample.

    As soon as your results are ready, we'll notify you by email and text message. Your results will then be available to view in your my.gettested.io account.